24 Volt 'Portable' Compressor (Parts List Pending)
Greg Maiser's mog projects
November projects

Return to Greg's Unimog Page

Click on images to view full size

Compressor2 The 24Volt compressor is from Surplus Center.

It's mounted in an ammo box, held onto on a hardwood base plate by muffler clamps.

There is a pressure regulator, intake and output side filters, a pressure gauge, and quick disconnects.

Power cord shown with alligator clamps, but I have purchased the plug to fit the Unimog dash power jack. (Under $10 from Jim Ince!

AirHoseandChuck 6 foot coiled air hose with quick connectors at both ends (Harbor freight)

Air chuck that clamps to the valve stem, off an old bicycle pump. (You don't have to hold the air chuck on the stem the whole time you're airing up this way!)

PARTS LIST: Pending - I need to pull the reciepts and supply you with part numbers for all of it...

Approximate cost - $180-200